High Pressure Supply Pumps

The SKR110A50PAL grease lubricator is a pump unit for grease that consists of a 110 type Air-Powered(R) pump on a cart with air lift.
Ideal for greasing vehicles and construction equipment, maintaining equipment in all fields, and greasing products on production lines.
· Inline high viscosity pump unit 50 x 1 ratio

[Usable Containers]
JIS Z 1620 Steel Pail Equivalent, or Resin Container Equivalent to This

[Compatible Materials ]Grease NLGI #0~2
A note concerning materials. This applies to all high-viscosity products.
· Cannot be used with materials that contain food or slurry.
· The applicable range of NLGI No. (grease consistency) is provided as a rough approximation only.
· It may be impossible to use the product with some greases depending on their properties, even if they are within the scope of application for the product.

Features

・ Compact storage with telescopic slider lift.

・ Set the pail container as it is.

・ Entire lift rises with the pump, avoiding contact with the body.

◆ Special Specifications

-PL Inductor Plate (Double-layered packing type)	-SW with Detection Switch
The double-layered packing prevents grease from leaking from the side of packings. Compared to the standard specification, it has a higher sealing performance, reducing the amount of air entering the pail and material remaining on the inner surface of the container. Suitable for greases with relatively high viscosity.	To prevent empty operation due to material depletion, a lower limit detection sensor is attached to the lift, which outputs a signal externally when the lift is lowered to a desired position.
Inductor plate 805143 (IDP-PAL/PL)	Detection switch

Specifications

*Installation of a lower limit detector to prevent dry-running and air contamination is recommended. Please contact our sales office for details.

Dimentional drawing

SKR110A50PAL

Performance curve

*Avoid using in the ranges in blue in the graph below.