High Pressure Supply Pumps
180 Type (65 x 1) Divorced Pump Unit for Pails SR180P65PWAL-T
This pump unit is suitable for transferring extremely high-viscosity materials.
Its high pump ratio allows for high discharge pressure even at a low air supply pressure.
To prevent adhesion of anaerobic materials such as sealants and putty materials, a cup is attached to the gland section to hold the solution.
[Usable Containers]
JIS Z 1620 Steel Pail Equivalent, or Resin Container Equivalent to This
[Compatible Materials ]Grease NLGI #0~3, Adhesives
A note concerning materials. This applies to all high-viscosity products.
· Cannot be used with materials that contain food or slurry.
· The applicable range of NLGI No. (grease consistency) is provided as a rough approximation only.
· It may be impossible to use the product with some greases depending on their properties, even if they are within the scope of application for the product.
Features
-T：Tube Indicator Plate
[Suitable Grease: No. 1~3]
The high sealing property of the packing makes it suitable for extremely high viscosity materials that require lift pressurization.
Specifications
Product No. | 881160 | |
Model | SR180P65PWAL-T | |
Pump No. | 854863 | |
Maximum Discharge Pressure (MPa) | 45.5 | |
Material Connection Discharge Port | Rc3/4 | |
Air Connection Supply Port | G3/8(F) | |
Operating Air Pressure Range (MPa) | 0.2～0.7 | |
Temp Range (°C) | Ambient | 0～60 |
Material Temperature | 0～80 | |
Water Discharge (mL)/Cycle | 76 | |
Net Weight (kg) | 65 | |
Dimentional drawing
SR180P65PWAL-T(881160)
SR180P65PWAL-T(881160)
Performance curve
◆ Auto Switch & Oil Cap
Auto Switch | Oil Cap: Sold as a Set of Three. |
When attached to the air cylinder of a lift, it sends a signal externally when the lift is at the desired height. | Filling the cup with solution when using high-viscosity materials such as adhesives prevents adhesion of the material oozing from the plunger section. |
687062（SR140-SW） | 716900：Oil Cylinder |
 |  |