High Pressure Supply Pumps

140 Type (25 x 1, 38 x 1, 50 x 1) Divorced Pump Unit for Drum Containers SR140DAL series

This is a pump unit for 200 L drum containers with a 140 type Air-Powered(R) pump mounted on an air-powered lift. Ideal for supplying putty, adhesive, grease, etc. to multiple equipment. In addition, the lift's pressurizing function makes it easy to set drum containers.
3 types of pump ratios are available, so select the pump that meets your requirements.

[Usable Containers]
JIS Z 1600 Steel Open-head Drum or JIS Z 1601 Steel Tight-head Drum or Equivalents

[Suitable Materials ] Grease NLGI #0~2 , Adhesives
A note concerning materials. This applies to all high-viscosity products.
· Cannot be used with materials that contain food or slurry.
· The applicable range of NLGI No. (grease consistency) is provided as a rough approximation only.
· It may be impossible to use the product with some greases depending on their properties, even if they are within the scope of application for the product.

Specifications

Product No.		881113	881114	881115
Model		SR140P25DAL	SR140P38DAL	SR140P50DAL
Pump No.		854560	854561	854562
Maximum Discharge Pressure (MPa)		17.5	26.6	35
Material Connection Discharge Port		Rc1/2
Air Connection Supply Port		G 3/4(F)
Operating Air Pressure Range (MPa)		0.2～0.7
Temp Range (°C)	Ambient	0～60
	Material Temperature	0～80
Water Discharge (mL)/Cycle		116.2	76	61.2
Net Weight (kg)		173

Dimentional drawing

Anchor Mounting Dimensions (For left/right mounting)

Anchor Mounting Dimensions (For front/rear mounting)

SR140DAL

Performance curve

*Avoid using in the ranges in blue in the graph below.

Pump No.
854560	854561	854562