High Pressure Supply Pumps

110 Type (50 x 1) Inline Pump Unit for Drum Containers HPP110A50/HPP110A50AL/DR110A50AL

【HPP110A50】

This pump unit consists of a 110 type Air-Powered(R) pump, a dedicated drum cover, and a follow plate.
The effect of the follow plate allows material to be transferred with no air biting.

【HPP110A50AL】

This pump unit is equipped with a dedicated air-operated lift for the HPP110A50.
Operating the valve raises and lowers the pump and drum cover for easy drum replacement.

【DR110A50AL】

This is a pump unit for 200L drums with a Model 110 Air Powered(R) pump mounted on an air-operated lift.
The lift is raised and lowered by valve operation.
The air supply function allows easy removal of the pump and inductor plate when changing drums.

【Usable Containers】
JIS Z 1600 Steel Open-head Drum or JIS Z 1601 Steel Tight-head Drum or Equivalents

[Suitable Materials ] HPP110A50・HPP110A50AL：Grease NLGI#0、1
[Suitable Materials ] Grease NLGI #0~2, Adhesives

*A note concerning materials. This applies to all high-viscosity products.
· Cannot be used with materials that contain food or slurry.
· The applicable range of NLGI No. (grease consistency) is provided as a rough approximation only.
· It may be impossible to use the product with some greases depending on their properties, even if they are within the scope of application for the product.

Specifications

Product No.		880629	880630	880628
Model		HPP110A50	HPP110A50AL	DR110A50AL
Pump No.		851783	851783	851783
Maximum Discharge Pressure (MPa)		35	35	35
Material Connection Discharge Port		G1/4(F)	G1/4(F)	G1/4(F)
Air Connection Supply Port		G1/4(F)	G1/4(F)	G1/4(F)
Operating Air Pressure Range (MPa)		0.2～0.7	0.2～0.7	0.2～0.7
Temp Range (°C)	Ambient	0～60	0～60	0～60
Temp Range (°C)	Material Temperature	0～80	0～80	0～80
Water Discharge (mL)/Cycle		11	11	11
Net Weight (kg)		21	102	105

Dimentional drawing

HPP110A50(880629)

HPP110A50AL(880630)

DA110A50AL(880631)

Performance curve

*Avoid using in the ranges in blue in the graph below.