JORC KAPTIV-CS-HP

High Pressure Level-Sensing Drain

The JORC KAPTIV-CS-HP takes condensate management to the next level with its robust construction and superior level-sensing capabilities, ideal for high-pressure compressed air applications. Experience worry-free drainage and energy efficiency thanks to its smart discharge technology and durable design.

Electronic zero air loss drain up to 50 bar

The KAPTIV-CS-HP is a compact electronically operated level sensed condensate drain which offers zero air-loss during the condensate discharge cycle for applications up to 50 bar.

The KAPTIV-CS-HP is cost effective and offers a rapid pay-back period due to a competitive pricing level, low stocking cost, zero air loss and energy saving aspects.

The KAPTIV-CS-HP can be installed in all compressed air system components up to 100 m3/min. regardless size and climate zone – only 1 model needed!

The robust industrial housing, the alarm feature and the 2/2 way direct acting valve assembly make the KAPTIV-CS-HP a reliable solution for all compressed air system applications. The KAPTIV-CS-HP can be applied in oil lubricated as well as oil-free applications.

The KAPTIV-CS-HP offers an integrated mesh strainer (to prevent large particles from entering the valve orifice), is easy to disassemble and is service friendly.

  • Capacitive level sensing technology saves air, energy and money.

  • Operating pressure up to 50 bar.

  • Competitive compact zero air loss draining solution.

  • Alarm function (N/O or N/C) incorporated as a standard.

  • No sizing charts required.

  • The KAPTIV-CS-HP can be connected to any alarm device.

  • Visual display of operating status.

  • Direct acting valve assembly, ensuring reliable discharge operation.

Robust aluminium housing with three inlet options, offering you installation flexibility.

inletshp.png

Integrated mesh strainer to protect the valve from clogging.

strainer.png

Extremely easy to disassemble, offering you maintenance speed and simplicity.

disassembly.jpg

  • MAX. COMPRESSOR CAPACITY

100 m³/min. (3500 CFM)

  • MAX. DRAINAGE CAPACITY A1/A2 VERSION

120 liters condensate per hour at 50 bar

  • MIN./MAX. SYSTEM PRESSURE

0 - 50 bar (0 - 725 psi)

  • MIN./MAX. MEDIUM TEMPERATURE

1 - 50 °C (34 - 122 °F)

  • MIN./MAX. AMBIENT TEMPERATURE

1 - 50 °C (34 - 122 °F)

  • SUPPLY VOLTAGE OPTIONS

230VAC / 115VAC / 24VAC / 24VDC

  • ENCLOSURE PROTECTION RATING

IP65 (NEMA4)

  • CONNECTOR TYPE (POWER AND ALARM)

DIN 43650-B

  • INLET CONNECTIONS

1/2″ BSP or NPT, 3 inlet options

  • INLET HEIGHT

11 cm (top) and 7.5 & 1.5 cm (side)

  • OUTLET CONNECTION

1/4″ BSP, with brass hose barb adapter

  • VALVE TYPE

2/2 way, direct acting

  • VALVE ORIFICE

1.8 mm

  • VALVE SEALS

FPM

  • SERVICEABLE VALVE

Yes

  • INTEGRATED MESH STRAINER

Yes

  • HOUSING MATERIAL

Corrosion resistant aluminium, EP coating

  • TEST FEATURE

Yes

  • VISUAL ALARM

Yes, LED indication

  • ALARM FEATURE A1 (N/O)

Normally Open alarm output contact -potential free relay
(Normally open contacts, closed when in alarm mode. LED on the drain is OFF in normal operation and ON when in alarm mode)


  • ALARM FEATURE A2 (N/C)

Normally Closed alarm output contact -potential free relay
(Normally closed contacts, open when in alarm mode. LED on the drain is OFF in normal operation and ON when in alarm mode)