Yamada High Purity Series

DP-38F High Purity Pump

Yamada DP-38F High-purity pumps achieve both high flow rate and high purity, achieving advanced fluid control. Excellent chemical resistance and long-life design provide stable performance even under the harsh conditions required at production sites.

25.2 GPM Max.

  • Available with 1" Flaretek or 1" ANSI flange liquid connections

  • Maximum flow up to 25.2 gallons/minute

  • End-user maintainable

  • Self-priming

  • Field-proven design

  • Clean room manufactured, DI water tested,

  • nitrogen purged, and double bagged

  • Ball or flat check valves available

  • Dampeners for F-Series PTFE Pumps

Pump Material

  • Casing: PTFE

  • Manifold: PTFE

  • Body (non-wetted): High-Density Polyethylene

Check Valve: Ball or Check Valves available

Flat check valve is recommended for increased flow (up to 5%) and suction lift applications. Ball check valve is recommended for flooded suction or viscous liquids.

Discharge Volume/Cycle: 0.1849 gal 

Maximum Cycles/Minute: 136

Port Dimensions

  • Liquid Inlet & Discharge: 1" Flaretek or 1" ANSI flange 150#

  • Air Inlet: Female 1/2" NPT

  • Air Exhaust (with muffler): Female 3/4" NPT

Air Supply Pressure: 30 to 100 PSI

Maximum Liquid Temperature: 212° F (100°C)

Net Weight:
Flaretek or Flange 115 lbs. (52 kg)